Sharp MX-M4070 Troubleshooting Guide - Page 20
The Finisher/saddle Finisher Does Not, Operate, Stapling Does Not Take Place Including, Saddle - driver
View all Sharp MX-M4070 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
General Problems ? THE FINISHER/SADDLE FINISHER DOES NOT OPERATE Check Does a message appear indicating that you need to remove paper from the stapler compiler? Have functions been disabled by the administrator? ! Solution ■ Remove all remaining paper from the stapler compiler. ■ Check with your administrator. Some functions may have been disabled in the setting mode. ? STAPLING DOES NOT TAKE PLACE (INCLUDING SADDLE STITCH) Check ! Solution Does a message appear instructing you to check the staple unit? Does a message appear instructing you to add staples? Is a different width of paper mixed in? Are there more sheets than can be stapled at once? Is a paper size that cannot be stapled included in the print job? Is the paper type setting of the tray selected in the printer driver set to a paper type that cannot be stapled? ■ Remove jammed staples. ► Maintenance (page 6) ■ Replace the staple cartridge. Do not forget to replace the staple case. ► Maintenance (page 6) ■ To perform mixed size stapling, using paper of the same width and select the [Same Width] setting. Stapling is not possible when paper of different widths are mixed together. When copying, select [Same Width] for [Mixed Size Original] in [Others]. ■ For the maximum number of sheets that can be stapled, see "SPECIFICATIONS" in Start Guide. ■ For paper sizes that can be stapled, see "SPECIFICATIONS" in Start Guide. ■ You must check the paper types that are set on the machine, and select a paper tray that is set to paper* that can be used for staple printing. Click the [Tray Status] button in [Paper Source] tab of the printer properties window and check the paper type setting of each tray. *Stapling is not possible on labels, tab paper, glossy paper, transparency film, or envelopes. In addition, if "Disable Staple" is selected in the user type, stapling will not be possible. 20