Sharp PG-A10X Operation Manual - Page 42
Computer Image Adjustment - resolution
UPC - 074000358843
View all Sharp PG-A10X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Computer Image Adjustment Using the "Fine Sync" menu, you can adjust the computer image, match the computer display mode, and check the input signal. For operation of the menu screen, see pages 32 to 35. Example: "Fine Sync" menu screen for INPUT 1 mode Adjusting the Computer Image In case of irregularities such as vertical stripes or flickering in portions of the screen, adjust "Clock", "Phase", "H-Pos" or "V-Pos" to obtain an optimal computer image. Select the item on the "Fine Sync" menu and adjust the computer image. Description of Adjustment Items Selectable items Use \ and | to Clock adjust vertical noise. Phase adjust horizontal noise (similar to tracking on your VCR). H-Pos center the on-screen image by moving it to the left or right. V-Pos center the on-screen image by moving it up or down. Note • You can automatically adjust the computer im- age by pressing on the projector or on the remote control. • To reset all adjustment items, select "Reset" and press . Special Modes (Special Mode Settings) Ordinarily, the type of input signal is detected and the correct resolution mode is automatically selected. However, for some signals, the optimal resolution mode in "Special Modes" on the "Fine Sync" menu may need to be selected to match the computer display mode. Select "Special Modes" on the "Fine Sync" menu and the appropriate resolution. Note • Avoid displaying computer patterns which repeat every other line (horizontal stripes). (Flickering may occur, making the image hard to see.) • When a DVD player or Digital Video is connected, select 480P as the input signal. • See "Signal Info (Checking the Input Signal)" on the next page for information on the currently selected input signal. 38 A10X_A10S#E_Print#p32_39.p65 38 03.2.4, 2:05 PM