Sharp PG-A10X Operation Manual - Page 49

Video System (Setting the Video System) The video input system mode is preset to "Auto"; however, a clear picture from the connected audiovisual equipment may not be received, depending on the video signal difference. In that case, switch the video signal. Select "Video System" on the "Options" menu and the appropriate video system. Background (Selecting a Startup and Background Image) Select "Background" on the "Options" menu and the image displayed upon the projector's startup and when no signal is being sent to the projector. Sharp Blue None Description of Background Images Selectable settings Description Sharp SHARP default image Blue Blue screen None Black screen Description of Video Systems Selectable settings PAL SECAM NTSC4.43 NTSC3.58 Description When connected to PAL video equipment. When connected to SECAM video equipment. When reproducing NTSC signals in PAL video equipment. When connected to NTSC video equipment. Note • The video signal can only be set in INPUT 2 or INPUT 3 mode. • In "Auto", images are displayed in PAL even if PAL-N or PAL-M input signals are received. Note • If the input signal has interference, the screen will be displayed during interference. Eco Mode (Setting the Eco Mode) Select " " (Eco Mode) or " " (Standard Mode) in "Eco Mode" on the "Options" menu. Description of Eco Mode Selectable settings Brightness Power consumption (When using AC 100V) Lamp life (Eco mode) 80% 190 W 4,500 hours (Standard mode) 100% 240 W 3,000 hours Note • Although lamp life and noise are improved when "Eco Mode" is set to " " (Eco mode), brightness decreases by 20%. • "Eco Mode" mode is factory preset to " " (Standard mode). Easy to Use Functions A10X_A10S#E_Print#p40_50.p65 45 45 03.2.4, 2:06 PM