Sharp PG-A10X Operation Manual - Page 48
Using the, Options - projector lamps
UPC - 074000358843
View all Sharp PG-A10X manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Using the "Options" Menu You can use the "Options" menu to enhance the usage for the projector. For operation of the menu screen, see pages 32 to 35. Example: "Options" menu screen for INPUT 2 (S-Video) mode Lamp Timer (Life) (Check- ing the Lamp Life Status) You can confirm the cumulative lamp usage time and the remaining lamp life (percentage). Display the "Options" menu to check the lamp life status. Description of Lamp Life Lamp usage condition Used with only " " (Eco mode) in "Eco Mode" Used with only " " (Standard mode) in "Eco Mode" Remaining lamp life 100% 5% about 4,500 hours 225 hours about 3,000 hours 150 hours OSD Display (Setting On- screen Display) This function allows you to turn the on-screen messages on or off. Select " " (ON) or " " (OFF) in "OSD Display" on the "Options" menu. Description of "OSD Display" Settings Selectable settings Description ON All On-screen Displays are displayed. OFF INPUT/VOLUME/AV MUTE/FREEZE/ AUTO SYNC/ENLARGE/ "An invalid button has been pressed." / "All buttons on Projector are locked." are not displayed. Note • It is recommended that the lamp be changed when the remaining lamp life becomes 5%. For lamp replacement, contact your nearest Sharp Authorized Projector Dealer or Service Center. • The table above indicates rough estimates in the case of using only in each mode shown. Remaining lamp life changes within the range of the values shown depending on the frequency at which "Eco Mode" is switched to " " (Eco mode) and " " (Standard mode) (see page 45). 44 A10X_A10S#E_Print#p40_50.p65 44 03.2.4, 2:06 PM