Sharp PG-C20XU PG-C20XU Operation Manual - Page 14
Connecting the Projector to Video Equipment
View all Sharp PG-C20XU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Setup & Connections Connecting the Projector Connecting other compatible computers When connecting the projector to a compatible computer other than an IBM-PC (VGA/SVGA/XGA/SXGA) or Macintosh (i.e. Workstation), a separate cable may be needed. Please contact your dealer for more information. • Connecting computers other than the recommended types may result in damage to the projector, the computer, or both. "Plug and Play" function • This projector is compatible with VESA-standard DDC 1/DDC 2B. The projector and a VESA DDC compatible computer will communicate their setting requirements, allowing for quick and easy setup. • Before using the "Plug and Play" function, be sure to turn on the projector first and the connected computer last. • The DDC, Plug and Play function of this projector operates only when used in conjunction with a VESA DDC compatible computer. Connecting the Projector to Video Equipment You can connect your projector to a VCR, laser disc player, DVD player, DTV decoder and other audiovisual equipment. CAUTION • Always turn off the projector while connecting to audiovisual equipment, in order to protect both the projector and the equipment being connected. Connecting a video source (VCR, laser disc player, DTV decoder or DVD player) using the standard video input 1 Connect one end of the S-video cable to the S-VIDEO INPUT 2 terminal, or one end of the video cable to the VIDEO INPUT 3 terminal on the projector and the video output terminal on the video source. 2 To use the built-in audio system, connect the red and white RCA connectors to the corresponding red and white AUDIO INPUT terminals on the projector and the audio output terminals on the video source. The S-VIDEO INPUT 2 terminal uses a video signal system in which the picture is separated into a color and a luminance signal to realize a higher-quality image. Projector INPUT 2 INPUT 3 S-VIDEO VIDEO AUDIO INPUT (S-VIDEO, VIDEO INPUT) L R • For higher quality video, you may use the S-VIDEO INPUT 2 terminal on the projector. S-video cable is sold separately. • If your video equipment does not have an S-video output terminal, use the composite video output terminal. 2 Audio cable (sold separately) To audio output terminals 1 Video cable (sold separately) To video output terminal S-video cable (sold separately) To S-video output terminal E-13 VCR, Laser disc player, DTV decoder or DVD player