Sharp PG-C20XU PG-C20XU Operation Manual - Page 37

Reverse/Invert Image Function Projector ON/OFF POWER LAMP TEMP. KEYSTONE INPUT AUTO SYNC BACK ENTER MENU Remote control 2, 3 2, 3 1, 4 (GUI) On-screen Display This projector is equipped with a reverse/invert image function which allows you to reverse or invert the projected image for various applications. Description of Projected Images Selected item Front Ceiling‫ם‬Front Rear Ceiling‫ם‬Rear Projected image Normal image Inverted image Reversed image Reversed and inverted image 1 Press MENU. 2 Press ∂/ƒ to select "PRJ Mode", and then press ENTER. 3 Press ∂/ƒ to select the desired projection mode, and then press ENTER. 4 To exit from the GUI, press MENU. • This function is used for the reversed image and ceilingmount setups. See page 19 for these setups. Special Mode Adjustment Projector ON/OFF POWER LAMP TEMP. KEYSTONE INPUT AUTO SYNC BACK ENTER MENU Remote control 2, 3 2, 4 1, 5 (GUI) On-screen Display Ordinarily, the type of input signal is detected and the correct resolution mode is automatically selected. However, since the projector cannot distinguish 640‫ן‬480 signal resolution on computers or 480P on DTVs, select an appropriate mode on "Special Modes." 1 Press MENU. 2 Press ∂/ƒ to select "Special Modes", and then press ENTER. 3 Press ∂/ƒ to select the optimal resolution mode. 4 Press ENTER to save the setting. 5 To exit from the GUI, press MENU. • When inputting DTV 480P signals, select "480P" in step 3 above. Useful Features E-36