Sharp PG-C20XU PG-C20XU Operation Manual - Page 28
Picture Adjustments
![]() |
View all Sharp PG-C20XU manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Picture Adjustments Projector Remote control ON/OFF POWER LAMP TEMP. KEYSTONE INPUT AUTO SYNC BACK ENTER MENU 2, 3, 4 2, 3 1, 5 (GUI) On-screen Display INPUT 1 (RGB) mode You can adjust the projector's picture to your preferences with the following picture settings. Description of Adjustment Items Selected item Contrast Bright Red Blue Reset Color Tint Sharp ƒ button ∂ button For less contrast For more contrast For less brightness For more brightness For weaker red For stronger red For weaker blue For stronger blue All image adjustment items are returned to the factory preset settings. For less color intensity For more color intensity Skin tones become purplish Skin tones become greenish For less sharpness For more sharpness INPUT 1 (COMPONENT) mode INPUT 2 (S-VIDEO) or INPUT 3 (VIDEO) mode • "Color", "Tint" and "Sharp" do not appear in the INPUT 1 (RGB) mode. • "Tint" does not appear when receiving "PAL", "SECAM", "PAL M", "PAL N" or "PAL (60 Hz)" in the S-VIDEO or VIDEO mode. 1 Press MENU. 2 Press ∂/ƒ to select "Picture" in INPUT 1 (RGB) mode, or to select "Picture1" or "Picture2" in INPUT 1 (COMPONENT), INPUT 2 (S-VIDEO) or INPUT 3 (VIDEO) mode, and then press ENTER. 3 Press ∂/ƒ to select a specific adjustment item, and then press ENTER. 4 Press ∂/ƒ to move the mark of the selected adjustment item to the desired setting. 5 To exit from the GUI, press MENU. • To reset all adjustment items, select "Reset", and then press ENTER. • The adjustments can be stored separately in the INPUT 1, INPUT 2 and INPUT 3 modes. Operation E-27
![](/manual_guide/products/sharp-pgc20xu-pgc20xu-operation-manual-240325a/28.png)