Sharp PG-C20XU PG-C20XU Operation Manual - Page 27

Operation Selecting the On-screen Display Language Projector ON/OFF POWER LAMP TEMP. KEYSTONE INPUT AUTO SYNC BACK ENTER MENU Remote control 2, 3 2, 4 1, 5 (GUI) On-screen Display English is the preset language for the On-screen Display. The language can be set to English, German, Spanish, Dutch, French, Italian, Swedish, Portuguese, Chinese, Korean or Japanese. 1 Press MENU. 2 Press ∂/ƒ to select "Language", and then press ENTER. 3 Press ∂/ƒ to select the desired language. 4 Press ENTER to save the setting. The On-screen Display is now programed to display in the language selected. 5 To exit from the GUI, press MENU. Selecting the Video Input System Mode (INPUT 2 or 3 mode only) Projector ON/OFF POWER LAMP TEMP. KEYSTONE INPUT AUTO SYNC BACK ENTER MENU Remote control 2, 3 2, 4 1, 5 (GUI) On-screen Display The video input system mode is preset to "Auto"; however, it can be changed to a specific system mode, if the selected system mode is not compatible with the connected audiovisual equipment. 1 Press MENU. 2 Press ∂/ƒ to select "Video System", and then press ENTER. 3 Press ∂/ƒ to select the desired video system mode. 4 Press ENTER to save the setting. 5 To exit from the GUI, press MENU. • When the system mode is set to "Auto", you may not receive a clear picture due to signal differences. Should this occur, switch to the video system of the source signal. E-26