Sharp PG-C20XU PG-C20XU Operation Manual - Page 23

Operation Operating the Wireless Mouse from the Remote Control Remote Control/Mouse Receiver Positioning • The remote control can be used to control the projector within the ranges shown below. • The remote mouse receiver can be used with the remote control to control the mouse functions of a connected computer within the ranges shown below. • The signal from the remote control can be reflected off a screen for easy operation. However, the effective distance of the signal may differ due to the screen material. Controlling the Projector Remote control 23Ј (7 m) 30˚ Using the Wireless Mouse Remote control 30˚ 30˚ 45˚ 45˚ 30˚ 13Ј(4 m) 30˚ 120˚ Remote mouse receiver Remote control Effective buttons in MOUSE mode Remote control (Front view) Mouse MOUSE RIGHT-CLICK AV MUTE Using as a Wireless Mouse • When MOUSE is pressed, the buttons on the remote control light up and the remote control enters MOUSE mode. • During MOUSE mode, the cursor can be used as the pointer. MOUSE mode is for about ten seconds while the buttons are lighting. • When MENU or ENLARGE is pressed, MOUSE mode is released to the normal mode. • Be sure the supplied remote mouse receiver is connected to your computer. • The wireless mouse may not operate correctly if your computer serial port is not correctly set up. Refer to the computer's operation manual for details of setting up/ installing the mouse driver. • For one-button mouse systems, use either the LEFT-CLICK or RIGHT-CLICK button. Remote control (Rear view) LEFT-CLICK E-22