Sharp PG-C355W Owners Manual for XG-C455W - Page 47

Picture Adjustment ("Picture" menu) Picture SIG 1 Picture Mode Contrast Bright Color 2 Tint Sharp Red Blue 3 CLR Temp 4 Progressive 5 Film Mode 6 DNR 7 MNR 8 Eco+Quiet Mode Reset SEL./ADJ. RETURN SCR 0 0 0 0 0 0 0 PRJ Net. Standard 7500K 3D Progressive Auto Off Off Off ENTER END 1 Selecting the Picture Mode Selectable items Description Standard Presentation Movie Game *sRGB For standard image Brightens portions of image for more enhanced presentations. Gives natural tint to the projected image. Gives sharpness to the projected image. For high fidelity reproduction of images from a computer. The default settings of CLR Temp 7500K 7500K 6500K 7500K - • "sRGB" is displayed only when RGB signal is input. • You can set or adjust each item in the "Picture" menu to your preference. Any changes you make are retained in memory. Note • You can also press PICTURE MODE on the remote control to select the picture mode. (See page 36.) • *sRGB is an international standard of color reproduction regulated by the IEC (International Electrotechnical Commission). As the fixed color area has been decided by the IEC, the images are displayed in a natural tint based on an original image, when "sRGB" is selected. For additional information about the sRGB function, visit "http://www.srgb.com/". You cannot set the items, "Red", "Blue" and "CLR Temp", when "sRGB" is selected. Menu operation Page 43 2 Adjusting the Image Adjustment items button \ button | Contrast For less contrast. For more contrast. Bright For less brightness. For more brightness. Color*1 For less color For more color intensity. intensity. Tint*1 For making skin For making skin tones purplish. tones greenish. Sharp*1 For less sharpness. For more sharpness. Red*2 For weaker red. For stronger red. Blue*2 For weaker blue. For stronger blue. *1 Not adjustable/selectable in the RGB input mode. *2 Not adjustable/selectable when selecting "sRGB" in "Picture Mode". Note • "Red" and "Blue" cannot be set when selecting "sRGB" in "Picture Mode". • To reset all adjustment items, select "Reset" and press ENTER. 3 Adjusting the Color Temperature Selectable items Description 5500K For lower color temperature for warmer, 6500K reddish incandescent-like images. 7500K 8500K 9300K For higher color temperature for cooler, 10500K bluish, fluorescent-like images. Note • Values on "CLR Temp" are only for general standard purposes. • "CLR Temp" cannot be set when selecting "sRGB" in "Picture Mode". Info • When "sRGB" is selected, the projected image may become dark, but this does not indicate a malfunction. -45 Useful Features