Sharp PG-C355W Owners Manual for XG-C455W - Page 50
Selecting the Dynamic Range, Setting the Video System, Checking the Input Signal
![]() |
UPC - 074000365629
View all Sharp PG-C355W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 50 highlights
Signal Adjustment ("SIG-ADJ" Menu) 5 Selecting the Dynamic Range An optimum picture may not be displayed if a DVI-D-capable device's output signal type and the projector's input signal type do not match. If this should occur, switch "Dynamic Range". Selectable items Description Auto When the black levels of the image show Standard banding or appear faded, select the item Enhanced that results in the best picture quality. (In most circumstances, "Standard" should be selected.) Menu operation Page 43 7 Checking the Input Signal This function allows you to check the current input signal information. Note • The Dynamic Range can be selected only when "DVI-D" input mode is selected. 6 Setting the Video System The video input system mode is factory preset to "Auto"; however, a clear picture from the connected audio-visual equipment may not be received, depending on the Video signal difference. In that case, switch the Video signal. Selectable items Auto PAL SECAM *NTSC4.43 NTSC3.58 PAL-M PAL-N PAL -60 * When reproducing NTSC signals in PAL video equipment. Note • The Video signal can only be set in VIDEO or S-VIDEO mode. • When "Video System" is set to "Auto", you may not receive a clear picture due to signal differences. Should this occur, switch to the video system of the source signal. -48
![](/manual_guide/products/sharp-xgc455w-owners-manual-xgc455w-177bc41/50.png)