Sharp PG-C355W Owners Manual for XG-C455W - Page 51

Screen Adjustment ("SCR-ADJ" Menu) Pict. SIG 1 Resize 2 Image Shift H-Keystone 3 V-Keystone Auto V-Keystone 4 OSD Display 5 Background 6 Menu Position 7 PRJ Mode 8 Language SCR-ADJ PRJ Net. Normal 0 0 0 On On Logo Center Front English SEL./ADJ. RETURN ENTER END 1 Setting the Resize Mode Note • For details of the Resize mode, see pages 37 and 38. • You can also press RESIZE on the remote con- trol to set the resize mode. (See page 37.) 2 Adjusting the Image Position You can move the projected image vertically. Menu operation Page 43 3 Keystone Correction When the image is projected either from the top or from the bottom towards the screen at an angle, the image becomes distorted trapezoidally. The function for correcting trapezoidal distortion is called Keystone Correction. Auto V-Keystone Correction Set "Auto V-Keystone" on the "SCR-ADJ" screen menu to "On". Manual Keystone Correction Set "Auto V-Keystone" on the "SCR-ADJ" screen menu to "Off". Select "V-Keystone", and then press \ or | to parallelize the left and right sides of the projected image with the slide bar. To parallelize the upper and lower sides, select "HKeystone" and press \ or |. Vertical Keystone Correction Horizontal Keystone Correction \ button | button Note • This function only works in some RESIZE modes. (See pages 37 and 38.) • To reset this function, select "0". Note • The Keystone Correction can be adjusted up to an angle of approximately ±12 degrees with "Auto V-Keystone" and up to an angle of approximately ±50 degrees with "V-Keystone" and approximately ±30 degrees with "H-Keystone". • When the screen is slanting or the image is deteriorated, set "Auto V-Keystone" to "Off". Useful Features -49