Sharp PG-C355W Owners Manual for XG-C455W - Page 53

Helpful Functions Set during Installation ("PRJ-ADJ" menu) Pict. SIG 1 Auto Power Off 2 Auto Restart 3 System Sound 4 Speaker 5 Audio Out 6 Monitor Out 7 LAN/RS232C 8 RS-232C 9 Fan Mode 0 System Lock q All reset SCR PRJ-ADJ Net. On On On On FAO Enable Enable 9600bps Normal Disable w Lamp Timer (Life) [ 0]h [ 0] min ( 100%) SEL./ADJ. RETURN ENTER END 1 Auto Power Off Function Selectable items Description On The projector automatically enters the standby mode when no input signal is detected for 15 minutes or longer. Off The Auto Power Off function will be disabled. Note • When the Auto Power Off function is set to "On", 5 minutes before the projector enters the standby mode, the message "Enter STANDBY mode in X min." will appear on the screen to indicate the remaining minutes. 2 Auto Restart Function Selectable items Description On If the power cord is unplugged from the outlet or the breaker switch is turned off when the projector is on, then the projector automatically turns on when the power cord is plugged into the AC outlet or the breaker switch is turned on. Off The projector does not turn on auto- matically when the power cord is plugged into the AC outlet or the breaker switch is turned on. 3 Setting the Confirmation Sound (System Sound) Selectable items Description On A confirmation sound is made when the projector turns on/off. Off No confirmation sound is made. Menu operation Page 43 4 Speaker Setting This function allows you to set the audio output of the internal speaker to "On" or "Off" such as when the projector is connected to an external amplifier. Selectable items Description On The audio signal is output from the internal speaker. Off The audio signal is not output from the internal speaker. 5 Audio Output Type Setting This function determines whether the audio level output from the AUDIO output (MONITOR output) terminal is fixed or variable by linking with VOLUME. Selectable items Description FAO Audio output that does not vary in (Fixed Audio strength with the volume level of the Output) source projector. VAO Audio output that varies in strength with (Variable the volume level of the source projector. Audio Output) Info • When "Audio Out" has been set to "VAO", first make sure to lower the volume of the projector before turning the power on or off and when switching the input. 6 Monitor Output 7 LAN/RS232C When set to "Enable", the function is activated and power is consumed even in the standby mode. It is recommended that the function be set to "Disable" when it is not connected.This reduces power consumption when the projector is in the standby mode. Selectable items Enable Disable Description The function is activated even if the projector is in standby mode. The function is switched off when the projector is in standby mode. Note • When you want to control the projector using the LAN/RS232C function, select "Enable". -51 Useful Features