Sharp PN-H701 Operations Manual - Page 13
Digital audio output optical terminal, Headphone terminal
![]() |
View all Sharp PN-H701 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Connecting Peripheral Equipment • Compatible audio signals - Type: Linear PCM (2 ch), AAC, Dolby Digital - Sampling frequency: 48kHz / 44.1kHz / 32kHz • Use an HDMI cable connector with the following dimensions: Thickness: 1/2 inch (12 mm) or less 5. PC D-sub input terminal • When using the audio input terminal with the PC D-sub input terminal, set AUDIO SELECT of INPUT SELECT in the SETUP menu to VIDEO + AUDIO. • When using the PC D-sub input terminal, space is required behind the monitor. 6. USB port • Connect a USB flash drive to the USB port. • Do not connect a USB device other than a USB flash drive. • Turn off the power of the monitor when removing a USB flash drive. Supported USB flash drives File System FAT32 Capacity Up to 32 GB (maximum file size 2 GB) • Do not use a USB flash drive with a security function or a write protection function. • Use a USB flash drive with a shape that can be inserted in the USB port. Some USB flash drives with special shapes cannot be inserted. Do not forcibly insert a USB flash drive. This may damage the connector and cause failure. 7. Audio input terminal • This is used to input analog audio when video is shown using the HDMI3 input terminal or the PC D-sub input terminal. Check the setting in AUDIO SELECT of INPUT SELECT in the SETUP menu. • Use an audio cable without resistance. 8. Headphone terminal • Use commercially available headphones (mini stereo jack). • The output sound varies depending on the input mode. • The volume can be adjusted using the volume adjustment. • When headphones are connected to the headphone terminal, sound is not output from the monitor speakers. 9. Digital audio output (optical) terminal • You can output MPEG2 AAC / Dolby Digital audio format from the monitor. • Use the following for the digital audio output (optical) terminal. Thickness: 1/2 inch (12 mm) or less 10. CONTROL terminal (RS-232C input terminal) • The monitor can be connected to a PC using the RS232C conversion cable (supplied) and a commercially available RS-232 straight cable to control the monitor from the PC. 11. LAN terminal • You can control the monitor from a PC on a network by connecting a commercially available LAN cable between this terminal and a network. 13 E
![](/manual_guide/products/sharp-pnh701-operations-manual-4080dc6/13.png)