Sharp UP-3500 UP-3500 Operation Manual - Page 17

Selecting an Operating Mode The POS terminal will display the following listing by touching the [MODE] key. Mode selection window: I Operating modes You can select any mode other than REG from the list in the mode selection window. Your POS terminal supports the following operating modes: REG mode Unit PRICE mode OP X/Z mode X1 mode Z1 mode X2 mode Z2 mode X3 mode Z3 mode X4 mode Z4 mode PGM1 mode PGM2 mode OPEN STORE CLOSE STORE E-PAYMENT JOBS E-PAY REPORTS SD CARD mode This mode allows you to enter various sales information. The mode selection window does not list this mode. To select this mode from the mode selection window, touch the [EXIT] key. This mode allows you to program unit price of PLUs. This mode allows cashiers to take X or Z reports on their sales information. It can also be used for employee time function. This mode is used to take various daily reading reports (X1 reports). This mode is used to take various daily resetting reports (Z1 reports). This mode is used to take various weekly or monthly reading reports (X2 reports). This mode is used to take various weekly or monthly resetting reports (Z2 reports). This mode is used to take various weekly or monthly reading reports (X3 reports). This mode is used to take various weekly or monthly resetting reports (Z3 reports). This mode is used to take various weekly or monthly reading reports (X4 reports). This mode is used to take various weekly or monthly resetting reports (Z4 reports). This mode allows you to program those items which need to be changed often such as unit prices and discount percentages. This mode allows you to program those items which can be programmed in the PGM1 mode and do not require frequent changes such as date, time, and terminal functions. Open store operation Close store operation E-PAYMENT jobs E-PAYMENT reports This mode provides data communications between the POS terminal and your personal computer using a SD memory card 15