Sharp UP-700 Programming Guide - Page 48

[3 BACKUP MASTER] DISPLAY: Setting screen [4 STD. WITH IRC] DISPLAY: Setting screen Select the desired item to be changed and press the ENTER key. The setting content is described below. DISPLAY TEXT IP ADDRESS 1 IP ADDRESS 2 IP ADDRESS 3 IP ADDRESS 4 CONTENTS SELECT ITEM Terminal No. 001-254 MRS 192 168 000 000 [5 STAND ALONE] Used to restore to a stand alone machine. Select the desired item to be changed and press the ENTER key. The setting content is described below. DISPLAY TEXT CONTENTS IP ADDRESS 1 IP ADDRESS 2 IP ADDRESS 3 IP ADDRESS 4 Terminal No. GLU GLU system POSITIVE NEGATIVE Positive # system Negative # system SELECT ITEM MRS 192 168 000 001-254 000 CENTRALIZED CENTRALIZED INDIVIDUAL CENTRALIZED CENTRALIZED INDIVIDUAL CENTRALIZED CENTRALIZED INDIVIDUAL Regarding IP address 1-3, use the same address for all machines (master, back-up master, and satellites) on the inline system. For IP address 4, enter the machine's own terminal No. on the inline system. When you have completed your selections, press the [CA/AT] key. The [IRC SETTING] screen appears and the setup starts automatically. DISPLAY: SRV IRC SETUP 1: SAVE NON DELETE 2: OTHER DELETE 3: SAVE CREATE 4: OTHER CREATE 2. [2 IRC RESET] This operation clears only the working memory for inline operations. The program memory for inline operations remains unchanged even after the resetting is performed. Inline communications can also be achieved.