Sharp UX-B800SE UX-BX800SE Operation Manual - Page 12
Installing the Print Cartridge, Make sure all, tape is removed, CAUTION, DO NOT, CAUTION! DO - replacement cartridge
UPC - 074000034204
View all Sharp UX-B800SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installing the Print Cartridge If the display shows [PRINTER ERROR] or [PRINTER ERROR/CHECK PAPER], open the cover and check for jammed paper. Remove any jammed paper (see page 62) and close the cover. 2 Remove only the tape from the new cartridge. • Make sure all tape is removed. • CAUTION! DO NOT touch the gold contact area on the cartridge. 3 Make sure the cartridge holder is in the position shown. Place your fingers on top of the holder and open the holder release. • CAUTION! DO NOT touch the gold contact area or pull on the cable. • If you are replacing the cartridge, remove the old cartridge. If you are going to use the old cartridge again, place it in an air-tight container (containers for this purpose can be purchased at most office supply stores). 10 4 Insert the new print cartridge (➊). Close the holder (➋), making sure it clicks into place. 2 1 5 Close the cover, pressing firmly on both front corners. Display: [CHANGE CARTRIDGE]/ [1=NEW, 2=OLD]. 6 Press (NEW) if the cartridge you installed is new. Display: [NEW CARTRIDGE?] / [OK:PRESS START] Press (OLD) if the cartridge you installed is old. 7 Press . If you selected "OLD" in the previous step, this completes the installation procedure. (Note: If you find that print quality is not satisfactory, see p. 53 to align the print cartridge.)