Sharp UX-B800SE UX-BX800SE Operation Manual - Page 61
Messages and Signals, Display messages - server error smtp
UPC - 074000034204
View all Sharp UX-B800SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Messages and Signals 10. Troubleshooting Messages and Signals Display messages Note: If you have turned on the Caller ID function, see page 38 for display messages related to Caller ID. ADD PAPER & / PRESS START KEY (alternating messages) Check the printing paper. If the tray is empty, add paper and then press . If there is paper in the tray, make sure it is inserted correctly (take out the stack, align the edges evenly, and then reinsert it in the tray) and then press . CHANGE CARTRIDGE This message appears after you install or replace the print cartridge (see page 10). CHECK CARTRIDGE The print cartridge is missing and must be installed, or is not installed correctly. CONNECTION ERROR A Fax to E-mail transmission was not successful because of a communication problem on your local network. This is usually due to a problem with the cable connections. Make sure that the cable ends are securely inserted in the LAN ports. Make sure that the correct cable is being used and that the cable is good. Make sure that your router or hub is powered on. CHECK E-MAIL SETTING Fax to E-mail transmission is not possible because the SMTP server or the sender address has not been specified in the e-mail settings (see page 17). DOCUMENT JAMMED The original document is jammed. See the following section, Clearing Paper Jams. Document jams will occur if you load more than 20 pages at once or load documents that are too thick (see page 24). The document may also jam if the receiving machine doesn't respond properly when you attempt to send a fax. FAX RX IN MEMORY A fax has been received in memory because the print cartridge needs replacement, you have run out of printing paper, or the paper is jammed. The fax will print out automatically when the problem is fixed. 59