Sharp UX-B800SE UX-BX800SE Operation Manual - Page 40

Caller ID (Requires Service) Caller ID list on this page).) If you do not need to have the area code removed from local numbers in the Caller ID list, press and go to Step 7. 5 Enter the 3 digits of your area code. 6 Press . STOP 7 Press to exit. Note: Some caller ID services may not provide the name of the caller. In this case, only the phone number will appear when you receive a call. Display messages One of the following messages will appear while the machine rings if caller information is not available. NO SERVICE No caller information was received. Make sure that your service has been activated. CALLER-ID Noise on the telephone ERROR line prevented reception of caller information. OUT OF AREA The call was made from an area which does not have Caller ID service, or the service is not compatible with your service. PRIVATE CALL Caller information was not provided at the caller's request. Caller ID list The machine keeps a log of the most recent 30 calls and faxes you have received (the Caller ID list). You can view the list and automatically dial a number from the list. ♦ The list is only available if you have Caller ID service and have turned on the Caller ID function. ♦ After you have received 30 calls, each new call will delete the oldest call. ♦ The Caller ID list can also be printed. See page 50. 1 Press until [] appears. 2 Press or through the list. to scroll STOP • To exit the list, press . 3 To dial a number, display the number and: • Fax: Load the document and press . Transmission will begin. • Voice call: Pick up the handset. Dialing will begin automatically. Deleting calls from the list To delete a single call from the list, display the call and press . 38