Sharp UX-B800SE UX-BX800SE Operation Manual - Page 13
Connecting the Phone Line, Name and Fax Number - ink
UPC - 074000034204
View all Sharp UX-B800SE manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
1. Installation Connecting the Phone Line If you selected "NEW", the machine will print an alignment page. Continue with the steps below. 8 In the alignment page, locate the line that is closest to a straight line. Connecting the Phone Line TEL. LINE jack In this example, "15" is closest to a straight line. 9 Enter the number of the straightest line with the number keys. • To clear a mistake, press . 10 Press . The machine is initially set to print high quality images, which require more ink. If you prefer to use less ink and speed up drying time, change the "INK SAVE MODE" setting to "ON" (pp. 45 and 49). When the resolution is set to HALF TONE, the machine is initially set to print at a slower printing speed to enable higher quality images. When using HALF TONE, if you prefer faster printing at the expense of slightly reduced image quality, change the "QUALITY MODE" setting to "NO" (pp. 45 and 49). Standard (RJ-11C) wall jack The machine is initially set for tone dialing. If you are on a pulse dial line, change the "DIAL MODE" setting (pp. 45 and 46). To change the language used in the display, reports, and lists, change the "LANGUAGE SELECTION" setting as explained on pp. 45 and 48. Name and Fax Number Enter your name and fax number. ♦ Your entered name and fax number will be printed automatically at the top of all fax pages you send. (This is required by FCC regulations.) FUNCTION 1 Press , then until [ENTRY MODE] appears. 2 Press . Display: [OWN NUMBER SET] 3 Press . [ENTER FAX #] 11