Sharp UX-B800SE UX-BX800SE Operation Manual - Page 28

Sending a Fax: Normal Dialing 1 Load the document(s). • The resolution/contrast cannot be adjusted unless the document is loaded. RESOLUTION/ 2 Press RECEPTION MODE one or more times until the desired resolution and contrast settings appear in the display. • The first time you move through the list of resolution settings, the contrast setting AUTO will appear next to each resolution setting. The second time you move through the list, the contrast setting DARK will appear. Note: In order to transmit in SUPER FINE resolution, the receiving machine must also have that resolution. If not, your machine will automatically step down to FINE. If you prefer to use FINE for the default resolution setting, change the "FINE PRIORITY" setting (p. 45). Sending a Fax: Normal Dialing With Normal Dialing, you pick up the SPEAKER handset (or press ) and dial by pressing the number keys. ♦ If a person answers, you can talk with them through the handset before sending the fax. ♦ Normal Dialing allows you to listen to the line and make sure the other fax machine is responding. 1 Load the document(s). RESOLUTION/ • If desired, press RECEPTION MODE to set the resolution and/or contrast. SPEAKER 2 Pick up the handset or press . Listen for the dial tone. 3 Dial the fax number of the receiving machine (press the number keys). 4 Wait for the connection. You will either hear a fax tone or the other person will answer. • If the other person answers, ask them to press their Start key (if you SPEAKER pressed , pick up the handset to speak with them). The receiving machine will issue a fax tone. 5 When you hear the fax tone, press . Replace the handset. • If the transmission is completed successfully, the machine will beep once. • If an error occurs, the machine will beep three times and print a Transaction Report to inform you of the problem (p. 51). Note: If the transmission is unsuccessful and the display shows [DOCUMENT JAMMED], remove the document as explained on page 62. 26