Sharp VN-EZ1U VNEZ1U Operation Manual - Page 21
Warning, Indicators
View all Sharp VN-EZ1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Important Information Important Information Warning Indicators CLOCK SET You have not yet set the built-in clock. POWER OFF The batteries are almost dead. NO CARD NO FILE The SmartMedia card is not loaded properly. Make sure that the correct side of the card is facing up and insert the correct end of the card into the slot. The SmartMedia card has no images recorded in the format the Digital Recorder can recognise. CARD FULL The SmartMedia card's capacity is insufficient. Delete unnecessary images from the card or replace the card with new one. FILE NO. FULL CARD ERROR The Digital Recorder has used up all the assignable image numbers for file names. Delete unnecessary images from the card or replace the card with capacity. The image files in the SmartMedia card is corrupted or is recorded in a format which is not compatible with the Digital Recorder. Copy the necessary images in your computer's hard disk and reformat the SmartMedia card. NOT INITIALIZED The SmartMedia card is not formatted. PROTECTED CARD The SmartMedia card is protected. Remove the Write-protect seal. 13 PROTECTED You are trying to delete a protected image, Unprotect it before deletion. READ ERROR Can not read the images in the SmartMedia card. The Digital Recorder possibly cannot play back the images recorded by another digital cameras. Make backup copies of images on other media, if necessary. And then format the SmartMedia card. WRITE ERROR Cannot record the images on the SmartMedia card. Check that the battery power is sufficient and the SmartMedia card is loaded properly. AUTO POWER OFF The power will be turned off about five seconds later. To turn it on again, slide the POWER switch. BUSY Now processing instructions. Wait until this indicator disappears. TEMP ERROR The Digital Recorder becomes warm to touch. Turn off the power and do not use for a while. CAN'T REC Cannot record the images in the Time-lapse Movie mode because the recording time is too short. For "x100" mode, recording time should be more than 10 sec. CAN'T DIVIDE Cannot divide the movie.