Sharp VN-EZ1U VNEZ1U Operation Manual - Page 77
Using, Floppy, Adapter
View all Sharp VN-EZ1U manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 77 highlights
Importing Images into a Computer Importing Images into a Computer Using a Floppy Disk Adapter Some computers require a commercially available floppy disk adapter to read a SmartMedia card contents. Precaution: • Also see the instructions that come with the floppy disk adapter and the documentation attached to your computer for the operations. 3 Insert a commercially available floppy disk adapter into your computer's 3.5" floppy disk drive slot. 1 Remove the SmartMedia card from the Digital Recorder (see page 17). Install the supplied driver software for the floppy disk adapter on your computer. 2 Insert the SmartMedia card into a floppy disk adapter as shown below. Make sure to insert the correct end of the card into the slot. Notes: • Note that you can write and delete images on the SmartMedia card through a floppy disk adapter even if the write-protect seal is attached on the card. • Note that some of commercially available floppy disk adapters are not compatible with a SmartMedia card of 16 MB or more. 67