Snapper 150Z Operater's Manual - Page 29
Replace Spark Plug
View all Snapper 150Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
Replace Spark Plug Spark Plug Gap: .030" (.76mm) 1. Stop the engine and allow it to cool. 2. Clean the area around the spark plug. 3. Remove the spark plug. 4. Check the spark plug gap. It should be .030" (see Figure 29). 5. Reinstall the plug into the cylinder head. Torque the plug to 180 in. lbs (20 N.m.). Maintenance RNeoptrfoodruction Figure 29. Spark Plug Gapping 29
29
Replace Spark Plug
Spark Plug Gap:
.030” (.76mm)
1. Stop the engine and allow it to cool.
2. Clean the area around the spark plug.
3. Remove the spark plug.
4. Check the spark plug gap.
It should be .030” (see
Figure 29).
5. Reinstall the plug into the cylinder head.
Torque the
plug to 180 in. lbs (20 N.m.).
Figure 29.
Spark Plug Gapping
Maintenance
Not for
Reproduction