Sony 400K Operating Instructions - Page 127
Error code list, Operation/error messages, Error code, Action to take, When Warning: SLACK appears
View all Sony 400K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Error code list Error code Er07-*** Er08-*** Er09-*** Er09-200 Er09-500 Er09-600 Er09-900 Er91-*** Er92-*** Action to take Turn off the power and consult your Sony representative. Or you may be able to eject the cassette using the following procedure. However, because it may damage the cassette, any damage is your responsibility. When "Warning: SLACK" appears 1 Turn off the camcorder. This may take about 15 seconds. 2 When the camcorder is turned off, turn it on again. 3 If the error code disappears, change the cassette because it may be damaged. If the error message appears again, turn off the power and consult your Sony representative. When "Warning: CASSETTE" appears 1 Press and hold the STOP button and the EJECT button at the same time for more than 3 seconds. 2 When the PLAY button, the REW button, and the FF button all flash at one time, release your fingers. 3 If the cassette is ejected, change the cassette because it may be damaged. If the error message appears again, turn off the power and consult your Sony representative. Turn off the power and consult your Sony representative. Turn off the power and consult your Sony representative. When the error code other than the ones listed above is displayed, turn off the power and consult your Sony representatives. Operation/error messages An operation or error message is displayed in the operation/error message display area (page 22) in the viewfinder. Operation/error message INTERVAL LOW LIGHT Meaning Indicates the camcorder is in the Interval Rec mode. Appears, depending on the setting, to indicate the subject illumination is inadequate. Chapter 7 Appendix 127 Operation Warnings