Sony 400K Operating Instructions - Page 40
Connections, Connecting a Monitor
View all Sony 400K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
Connections Chapter Chapter 3 Connections Connecting a Monitor As illustrated below, you can connect a color video monitor to the MONITOR OUT or VIDEO OUT connector of the camcorder. Color video monitor DSR-400/400P/450WS/450WSP The items displayed on a monitor are same as the ones on the viewfinder. For details, see "Status display on the viewfinder screen" on page 21. VIDEO IN connector 1) or SDI IN connector (DSR-450WS/450WSP only) 2) MONITOR OUT connector or VIDEO OUT connector (DSR-450WS/450WSP only) 1) When VBS is selected as the output signal of the VIDEO OUT connector 2) When SDI is selected as the output signal of the VIDEO OUT connector (only when a CBK-SD01 is installed) When a CBK-SD01 SDI Output Board is installed (DSR-450WS/450WSP only) If a color video monitor provided with an SDI input connector is used, select SDI as the output signal of the VIDEO OUT connector and connect the camcorder to the SDI IN connector of the color video monitor. The camera display image is output to the CBK-SD01 SDI Output Board even when playing a recorded image. Notes • Playing the tape on the camcorder mutes the audio signal portion of the SDI output. • You can select either VBS or SDI for the output signal of the VIDEO OUT connector, depending on the input connector used on the monitor. See 1) and 2) in the illustration above. For details about settings, see "Selecting the output signals (DSR-450WS/450WSP only)" on page 104. 40 Connecting a Monitor