Sony 400K Operating Instructions - Page 86
R GAIN <P>
![]() |
View all Sony 400K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 86 highlights
Chapter 5 Menu Displays and Detailed Settings Page AUDIO Item AU MODE AU HEADROOM AU FADE AU SG (1KHz) F AUDIO VOL VTR MODE REC TALLY BLINK STBY OFF TIMER PRESET WHT REC FORMAT SETUP ADD COLOR TEMP COLOR FINE R GAIN B GAIN D5600K AWB ENABLE DCC ADJUST DCC FUNCTION SEL DCC D RANGE DCC POINT DCC GAIN DCC DELAY TIME Settings Default FS32K/FS48K NTSC: -12dB/ -20dB PAL: -12dB/ -18dB OFF/ON FS48K NTSC: -20dB PAL: -18dB OFF OFF/ON OFF ENABL/DSABL ENABL OFF/ON ON 1MIN/3MIN/ 5MIN 1MIN DVCAM/DV SP DVCAM OFF/ON ON Displays color temperature (Converted form R/B GAIN). (-99 to 99) 3200 0 OFF/ON OFF DCC/ADP.K/ DCC FIX 400% / 450% / 600% 500% / 550% / 600% (-99 to 99) 0 USER Description File menu Page4 Sets the audio recording level. A P - Sets the audio reference level. Turns the audio fade-in and fade-out functions on or off. Sets whether to output a 1 kHz test tone during the Color Bar mode or not. Sets the validity of the AUDIO LEVEL knob on the front of the camcorder (page 10). (When setting to ENABL, the level of CH-1 is set to the value of AUDIO LEVEL knob on the front of the camcorder multiplied by the AUDIO LEVEL (CH-1/CH-2) control on the side of the camcorder.) - Turns the tally illumination control on A P or off in the event of BATTERY BEFORE END/TAPE BEFORE END. Sets the time of standby-off interval (if there is no operation for a preset interval time while the recording is stopped, the camcorder goes to standby-off mode automatically). Page4 Selects the type of video codec. - See "To use setup add (DSR-400/ 450WS only)" on page 65. Page1 Sets the color temperature of preset A P R St white balance. - Adjusts the value more precisely when the color temperature adjustment through COLOR TEMP is not satisfactory. Sets R gain of preset white balance. Sets B gain of preset white balance. Selects whether to electrically apply A St 5600K filter to preset white balance. Turns on and off the function which - automatically acquires the preset white balance. - Selects the function assigned to the A P Sc DCC switch. ADP.K stands for Adaptive Knee and FIX stands for fixed value. Sets the dynamic range when the A P DCC switch is set to the ON position. Adjusts DCC minimum knee point. Adjusts gain to DCC detected value. Adjusts DCC reaction speed. 86 Menu Organization and Operation
![](/manual_guide/products/sony-400k-operating-instructions-278dbac/86.png)