Sony 400K Operating Instructions - Page 15
Left and upper view - dsr 400
View all Sony 400K manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 15 highlights
Chapter 1 Overview i AUDIO IN (CH-1/CH-2) (audio channel 1/2 input selection) switches Select the audio input signals to be recorded on audio channels 1 and 2. The audio input is sourced as explained below based on the position of the switches. FRONT: The microphone connected to the MIC IN (+48 V) connector (page 16) WRR: A WRR-855 UHF Synthesized Tuner Unit (not supplied) REAR: Audio equipment connected to the AUDIO IN CH-1/CH-2 connectors (page 18) The following settings can be made on the AUDIO page of the MAINTENANCE menu. • Audio recording format Select either Fs48K or 32K. • Audio reference level Select either -12 dB or -20 dB (DSR-400/450WS), -12 dB or -18 dB (DSR-400P/450WSP). • Audio fade-in/fade-out Select either ON or OFF. j REC TRIGGER (external VTR trigger) switch Sets the function of the REC button on the camcorder or the VTR button on the lens when an external VTR is connected to the (i.LINK) DV OUT connector (page 18). Set this switch to INT ONLY when you need to do cut editing or dubbing using the (i.LINK) DV OUT connector. PARALLEL: Operates both internal and external VTRs simultaneously. INT ONLY: Operates the internal VTR only. External VTR operation is performed locally. EXT ONLY: Operates the external VTR only. k FRONT MIC LOW CUT switch Set to ON to insert a high-pass filter in the microphone circuit, reducing wind noise. Normally leave the switch in the OFF position. Left and upper view Front section 1 Accessory shoe 2 ASSIGN 3/4 switches 3 Viewfinder front-toback position locking knob 4 Shoulder strap fitting 5 Viewfinder left-to-right positioning ring 6 Viewfinder fitting shoe 7 LIGHT connector 8 MIC IN connector 9 Fitting for optional microphone holder a Accessory shoe Attach an optional accessory such as a video light (page 33). b ASSIGN 3/4 switches You can assign the desired functions on the FUNCTION 1 page of the OPERATION menu. For details, see "Assigning functions to ASSIGN switches" on page 106. c Viewfinder front-to-back position locking knob Loosen this knob to adjust the front-to-back position of the viewfinder (page 30). d Shoulder strap fitting Attach the supplied shoulder strap (page 32). e Viewfinder left-to-right positioning ring Loosen this ring to adjust the left-to-right position of the viewfinder (page 30). 15 Location and Function of Parts