Sony BDV-HZ970W Operating Instructions - Page 57

Note • In TV or STB mode, if you press any of the buttons above, the TV or STB operation mode button lights up. (However, depending on the code setting, some buttons may not work, and the TV or STB operation mode button may not light up.) • If you press other than the buttons above when the remote is in TV or STB mode, the TV or STB operation mode button does not light up. • Depending on the TV or component, you may not be able to use some of the buttons. Changing the preset code of the remote (Preset mode) 1 Press HOME. The home menu appears on the TV screen. 2 Press C/c to select [Setup]. 3 Press X/x to select [Remote Controller Setting Guide], then press . 4 Press X/x to select [Preset Mode], then press . 5 Press X/x to select the component type that you want to operate with the supplied remote, then press . 6 Press X/x to select the device's manufacturer, then press . 7 Press POP UP/MENU while pressing the operation mode button TV (for a TV) or STB (for a cable box, digital satellite receiver, digital video recorder, etc.). The remote enters Preset mode. The TV or STB operation mode button (whichever button you pressed) starts flashing. 8 When the TV or STB operation mode button starts flashing, enter the code on the TV screen using the number buttons, then press ENTER. If you successfully set the code, the TV or STB operation mode button will flash twice slowly. If the setting is unsuccessful, the TV or STB operation mode button will flash five times quickly. Note • You can quit Preset mode by pressing the TV or STB operation mode button (whichever button is flashing). • If you do not operate the remote for more than 10 seconds during presetting mode, the remote exits from presetting mode. Programming the remote code from another remote (Learning mode) You can program a remote code that is not stored in the supplied remote from a different component's remote, such as a TV remote. Buttons other than THEATER, ONE-TOUCH PLAY, [/1, BD, TV, and STB are assignable. 1 Press HOME. The home menu appears on the TV screen. 2 Press C/c to select [Setup]. 3 Press X/x to select [Remote Controller Setting Guide], then press . 4 Press X/x to select [Learning Mode], then press . 5 Press . 6 Prepare the other remote with the button which you want to program to the supplied remote. 7 Press TOP MENU while pressing the operation mode button TV (for a TV) or STB (for a cable box, digital satellite receiver, digital video recorder, etc.) for one second. The remote enters Learning mode. The BD operation mode button lights up and the TV or STB operation mode button (whichever button you pressed) starts flashing. 8 Press the button on the supplied remote to which you want to assign the new remote code. The TV or STB operation mode button lights up. Note • If the pressed button has already been assigned a remote code, the TV or STB operation mode button flashes five times quickly. In this case, clear the learned remote code of the button (page 58), then assign the new desired remote code. 57US Other Operations