Sony BDV-N890W Operating Instructions - Page 16

Getting Started Getting Started Step 1: Installing the System How to position the system Install the system by referring to the illustration below. A B F C G D E Attaching the stand to the unit (BDV-N990W only) You can install the unit in a raised position by attaching the stand. 1 Insert the pins of the stand in the holes on the bottom of the unit. Stand (supplied) 2 Secure the stand with the screws. H A Front speaker (L (left)) B Front speaker (R (right)) C Center speaker D Surround speaker (L (left)) E Surround speaker (R (right)) F Subwoofer G Unit H Surround amplifier Screws (supplied) • Use caution when placing the speakers and/or speaker stands attached to the speakers on a specially treated (waxed, oiled, polished, etc.) floor, as staining or discoloration may result. • Do not lean or hang on a speaker, as it may fall down. • The speaker of this set is not anti-magnetic. This may result in color unevenness when it is placed near a CRT TV or projector. • You can install the speakers on a wall. For details, refer to the supplied "Speaker Installation Guide." 16US