Sony BDV-N890W Operating Instructions - Page 24
Step 5: Performing the Easy Setup
View all Sony BDV-N890W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
Getting Started Step 5: Performing the Easy Setup Follow the Steps below to make the basic adjustments and network settings for the system. Displayed items vary depending on the country model. 1 Insert two R6 (size AA) batteries (supplied) by matching the 3 and # ends on the batteries to the markings inside the compartment. 2 Turn on the TV. 3 Connect the calibration mic to the A.CAL MIC jack on the rear panel. Set up the calibration mic at ear level using a tripod, etc. (not supplied). The front of each speaker should face the calibration mic, and there should be no obstruction between the speakers and the calibration mic. 4 Press [/1. 5 Switch the input selector on your TV so that the signal from the system appears on the TV screen. The Easy Setup Display for OSD language selection appears. 6 Perform [Easy Initial Settings]. Follow the on-screen instructions to make the basic settings using C/X/x/c and . C/X/x/c Depending on the connection method (page 18), perform the following setting. • HDMI cable connection: Follow the instructions that are displayed on the TV screen. • Video cord connection: Select [16:9] or [4:3] so that the picture is displayed correctly. For details about [Auto Calibration] settings in [Easy Initial Settings], see "Calibrating the Appropriate Speaker Settings Automatically" (page 37). 7 After completing of [Easy Initial Settings], perform [Easy Network Settings]. Press C/X/x/c to select [Easy Network Settings], then press . The Easy Network Settings display appears. 8 Follow the on-screen instructions to make the network settings using C/X/x/ c and . If the system cannot connect to the network, see "Network connection" (page 58) or "Wireless LAN connection" (page 58). To recall the Easy Initial Settings display/Easy Network Settings display 1 Press HOME. The home menu appears on the TV screen. 2 Press C/c to select [Setup]. 3 Press X/x to select [Easy Setup], then press . 4 Press X/x to select the setting, then press . • [Easy Initial Settings] • [Easy Network Settings] 24US