Sony BDV-N890W Operating Instructions - Page 21
Connecting the antenna (aerial), Step 3: Preparing for Network Connection, aerial
View all Sony BDV-N890W manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 21 highlights
Getting Started Connecting the antenna (aerial) Step 3: Preparing for Network Connection Rear panel of the unit AUDIO L R ANTENNA COAXIAL 75 A.CAL MIC AUDIO IN ECM-AC3 FM or FRONT R FRONT L FM wire antenna (aerial) (supplied) • Be sure to fully extend the FM wire antenna (aerial). • After connecting the FM wire antenna (aerial), keep it as horizontal as possible. • If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the unit to an outdoor FM antenna (aerial). • To connect the system to your network, perform [Easy Network Settings]. For details, see "Step 5: Performing the Easy Setup" (page 24). Select the method based on your LAN (Local Area Network) environment. • If you use a wireless LAN The system has built-in Wi-Fi, and you can connect the system to the network by making the network settings. • If you use other than a wireless LAN Connect to the network by making a LAN cable connection as follows. Rear panel of the unit USB 1 VIDEO OUT TV OPTICAL LAN (100) ARC IN 1 IN 2 OUT DIGITAL IN Broadband router LAN LAN cable (not supplied) Before performing the network settings When your wireless LAN router (access point) is Wi-Fi Protected Setup (WPS)-compatible, you can easily set the network settings with the WPS button. If not, check the following information in advance, and record it in the space provided below. • The network name (SSID*) that identifies your network**. 21US