Sony BDV-N890W Operating Instructions - Page 23

Attaching the cord cover to the unit, lead of the surround amplifier.

Get Sony BDV-N890W PDF manuals and user guides View all Sony BDV-N890W manuals
Add to My Manuals
Save this manual to your list of manuals

Page 23 highlights

Getting Started 4 Press "/1 to turn the system on. "/1 5 Connect the AC power cord (mains lead) of the surround amplifier. LINK/STANDBY indicator LINK/STANDBY When wireless transmission is activated, the LINK/STANDBY indicator turns green. If the LINK/STANDBY indicator does not turn on, see "Wireless sound" (page 56). About the LINK/STANDBY indicator The LINK/STANDBY indicator shows wireless transmission status, as follows. Indicator Status Turns green. The system is turned on, wireless transmission is activated and surround signals are being received. Turns orange. The system is turned on, wireless transmission is activated with the Secure Link function, and surround signals are being received. Flashes green or Wireless transmission is orange slowly. deactivated. Turns red. The surround amplifier is in standby mode while the system is in standby mode or wireless transmission is deactivated. Turns off. The surround amplifier is turned off. Flashes green quickly. The wireless transceiver is not inserted correctly into the wireless transceiver slot. Flashes red. The surround amplifier's protection is active. About the standby mode The surround amplifier enters standby mode automatically when the main unit is in standby mode or wireless transmission is deactivated. The surround amplifier turns on automatically when the main unit is turned on and wireless transmission is activated. To specify the wireless connection If you use multiple wireless products or your neighbors use wireless products, interference may occur. To prevent this, you can specify the wireless connection to link the main unit to the surround amplifier (Secure Link function). For details, see "Further Settings for the Wireless System" (page 43). Attaching the cord cover to the unit (BDV-N990W only) You can shield the connectors with the cord cover when you use the unit in a raised position with the stand. • Make sure that the wireless transceiver is inserted into the unit (page 22) before attaching the cord cover. Insert the pins of the cord cover in the holes on the rear of the unit. Cord cover (supplied) 23US

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
23
US
Getting Started
4
Press
"
/
1
to turn the system on.
5
Connect the AC power cord (mains
lead) of the surround amplifier.
When wireless transmission is activated,
the LINK/STANDBY indicator turns
green.
If the LINK/STANDBY indicator does not
turn on, see “Wireless sound” (page 56).
About the LINK/STANDBY
indicator
The LINK/STANDBY indicator shows wireless
transmission status, as follows.
About the standby mode
The surround amplifier enters standby mode
automatically when the main unit is in standby
mode or wireless transmission is deactivated.
The surround amplifier turns on automatically
when the main unit is turned on and wireless
transmission is activated.
To specify the wireless
connection
If you use multiple wireless products or your
neighbors use wireless products, interference
may occur. To prevent this, you can specify the
wireless connection to link the main unit to the
surround amplifier (Secure Link function). For
details, see “Further Settings for the Wireless
System” (page 43).
(BDV-N990W only)
You can shield the connectors with the cord
cover when you use the unit in a raised position
with the stand.
• Make sure that the wireless transceiver is inserted
into the unit (page 22) before attaching the cord
cover.
Insert the pins of the cord cover in the
holes on the rear of the unit.
Indicator
Status
Turns green.
The system is turned on, wireless
transmission is activated and
surround signals are being
received.
Turns orange.
The system is turned on, wireless
transmission is activated with the
Secure Link function, and
surround signals are being
received.
Flashes green or
orange slowly.
Wireless transmission is
deactivated.
Turns red.
The surround amplifier is in
standby mode while the system is
in standby mode or wireless
transmission is deactivated.
Turns off.
The surround amplifier is turned
off.
Flashes green
quickly.
The wireless transceiver is not
inserted correctly into the wireless
transceiver slot.
Flashes red.
The surround amplifier’s
protection is active.
"
/
1
LINK/STANDBY
LINK/STANDBY indicator
Attaching the cord cover to the
unit
Cord cover (supplied)