Sony CCD-TR40 Primary User Manual - Page 13
Camera, Recording
View all Sony CCD-TR40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 13 highlights
Basic Operations Camera Recording Make sure that the power source is installed and a cassette is inserted. When you start recording, the date is automatically recorded for 10 seconds (AUTO DATE feature). This feature works only once a day. You can use the Remote Commander to record yourself with your friends or family. When you use the Remote Commander, make sure that the REMOTE COMMANDER switch on the camcorder is set to ON (p. 42). Before you record one-time events, you may want to make a trial recording to make sure that the camcorder is working perfectly. (1) Pull out the viewfinder until it clicks. (2) Slide the LENS COVER switch to OPEN. (3) While pressing the small green button on the POWER switch, slide it to CAMERA. (4) Set the white mark of the PROGRAM AE dial to the green position. (5) Turn STANDBY up. Adjust the viewfinder lens so that the indicators in the viewfinder come into sharp focus (p. 11). (6) Press START/STOP. The camcorder starts recording and the red lamp lights up in the viewfinder. 2 LENS COVER OPEN CLOSE 3 POWER OFF netts for Better Shooting / Camera Recording 5 • NO STBY 0:00:00 Si E AUTO DATE 6 REC 0:00:01 S( J E JUL.4 1994 341 * To Stop Recording Momentarily Press START/STOP again. The "STBY" indicator appears in the viewfinder (Standby mode). To Finish Recording Turn STANDBY down and slide the POWER switch to OFF. Slide the LENS COVER switch to CLOSE and eject the tape (p. II). Notes on Standby mode If you leave the camcorder in Standby mode for 5 minutes, the camcorder goes off automatically. This prevents wearing down the battery and wearing out the tape. To resume Standby mode, turn STANDBY down once and turn it up again. To start recording. press START/STOP. 13