Sony CCD-TRV43 Operating Instructions - Page 71
Others
UPC - 027242550872
View all Sony CCD-TRV43 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 71 highlights
Additional information Trouble check Symptom Cause and/or Corrective Actions A vertical band appears when shooting a very bright subject. • The camcorder is not malfunctioning. The playback picture is not clear. • EDIT is set to ON in the menu system. m Set it to OFF. (p. 29) The picture is "noisy". • The video heads may be dirty. m Clean the heads using the Sony V8-25CLD/V8-25CLDR cleaning cassette (not supplied). (p. 64) The picture does not appear in the viewfinder. • The LCD panel is open. m Close the LCD panel. (p. 15) An unknown picture is displayed in the viewfinder or on the LCD screen. • If 10 minutes elapse after you set the POWER switch to CAMERA without inserting a cassette, the camcorder automatically starts the demonstration or DEMO MODE is set ON in the menu system. m Insert the cassette and the demonstration stops. You can deactivate the demonstration. (p. 29) The picture does not appear on the LCD screen. • Incorporated fluorescent tube is worn out. m Please contact your nearest Sony dealer. The five digit code appears. • The self-diagnosis function is activated. m Check the code and solve the problem. (p. 72) Picture is recorded in incorrect/ unnatural color. • The NIGHTSHOT switch is set to ON. m Set it to OFF. (p. 33) Picture appears too bright, and the subject does not appear in the viewfinder or on the LCD screen. • The NIGHTSHOT switch is set to ON in a bright place. m Set it to OFF, or use the NightShot function in a dark place. (p. 33) Others Symptom The supplied Remote Commander does not work. (CCD-TRV36/ TRV43/TRV46 only) The beep sounds for 5 seconds. There is dust in the viewfinder. Cause and/or Corrective Actions • COMMANDER is set to OFF in the menu system. m Set it to ON. (p. 28) • Something is blocking the infrared rays. m Remove the obstacle. • The batteries are not inserted with the correct polarity. m Insert the batteries with the correct polarity. (p. 79) • The batteries are dead. m Insert new ones. (p. 79) • Moisture condensation has occurred. m Remove the cassette and leave the camcorder for at least 1 hour. (p. 63) • Some troubles occured in your camcorder. m Remove the cassette and insert it again, then operate the camcorder. • Detach the eyecup and clean the viewfinder lens. (p.65) 71