Sony CCD-TRV70 Primary User Manual - Page 37
Editing, Another
View all Sony CCD-TRV70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 37 highlights
Editing onto Another Tape You can create your own video program by editing with any other Eli 8 mm, Hi 0 Hi8, VIIS VHS, Svcs S-VHS, [VII5M VHSC, S111150 S-VHSC, or la Betamax VCR that has video/audio inputs. Before Editing Connect the camcorder to the VCR using the supplied A/V connecting cable (p. 36). Set the input selector on the VCR to LINE, if available. (1) Set the POWER switch to VTR. (2) Set EDIT to ON in the menu system (p. 35). e uo 6uNneM uaans adei Jatpouy mu° Bump] 2 O MENU ) © EXECUTE) MENU EDIT OFF LaN, [MENU'. END • Signal flow OFF GI= Co C Starting Editing Turn down the volume of the camcorder while editing. Otherwise, picture distortion may occur. (1) Insert a blank tape (or a tape you want to record over) into the VCR and insert your recorded tape into the camcorder. (2) Play back the recorded tape on the camcorder until you locate the point where you want to start editing, then press II to put the camcorder in playback pause mode. (3) On the VCR, locate the recording start point and put the VCR in recording pause mode. (4) Press II on the camcorder and VCR simultaneously to start editing. To Edit More Scenes Repeat steps 2 to 4. To Stop Editing Press O STOP on both the camcorder and VCR. Use of the EDITSEARCH button You can play back the tape in the normal/reverse direction by holding down EDITSEARCH during playback pause mode. You can also play back still pictures successively at specific intervals by pressing EDITSEARCH intermittently. 37