Sony CCD-TRV70 Primary User Manual - Page 42
q=4.sci
View all Sony CCD-TRV70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Tips for Using the Battery Pack This section shows you how you can get the most out of your battery pack. Preparing the Battery Pack Always Carry Additional Batteries Have sufficient battery pack power to do 2 to 3 times as much recording as you have planned. Battery Life is Shorter in Cold Environment Battery efficiency is decreased and the battery will be used up more quickly if you are recording in cold environment. To Save Battery Power Turn the STANDBY switch on the camcorder down when not recording to save battery power. A smooth transition between scenes can be made even if recording is stopped and started again. While you are positioning the subject, selecting an angle, or looking through the viewfinder lens or on the LCD screen, the lens moves automatically and the battery is used. The battery is also used when a tape is inserted or removed. When to Replace the Battery Pack While you are using your camcorder, the remaining battery indicator in the viewfinder or on the LCD screen decreases gradually as battery power is used up. EMI 4.q=4.sci +4 When the remaining battery indicator reaches the lowest point, the indicator appears and starts flashing in the viewfinder or on the LCD screen. ((al on the next page) When the indicator in the viewfinder changes from slow flashing to rapid flashing while you are recording, turn the POWER switch to OFF on the camcorder and replace the battery pack. Leave the tape in the camcorder to obtain smooth transition between scenes after the battery pack is replaced. Note on the remaining battery indicator The remaining battery indicator of the camcorder may indicate a different remaining capacity from tha of the battery pack with its own indicator (not supplied). The indicator on the battery pack is more accurate. 42