Sony CCD-TRV70 Primary User Manual - Page 45
Maintenance, Information, Precautions
View all Sony CCD-TRV70 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 45 highlights
Tips for Using the Battery Pack/Maintenance Information and Precautions Maintenance Information and Precautions Moisture Condensation If the camcorder is brought directly from a cold place to a warm place, moisture may condense inside the camcorder, on the surface of the tape, or on the lens. In this condition, the tape may stick to the head drum and be damaged or the camcorder may not operate correctly. To prevent possible damage under these circumstances, the camcorder is furnished with moisture sensors. However, take the following precautions. Inside the Camcorder When 11] and ! indicators flash in the viewfinder or on the LCD screen, moisture has condensed inside the camcorder. If this happens, no other functions except for tape ejection will work. Eject the tape, turn off the camcorder, and leave it with the cassette holder open for at least one hour. The camcorder can be used again if the WI indicator does not appear when the power is turned on again. O I C' On the Surface of the Tape If there is moisture on the surface of the tape, when you insert cassette and press a tape transport button (> PLAY, etc.), the indicator in the viewfinder or on the LCD screen flashes. In this case, no other functions except for tape ejection will work. Eject the tape, turn off the camcorder and leave it with the cassette holder open for at least one hour. The camcorder can be used again if the !. indicator does not appear when you insert the cassette and press one of the tape transport button. On the Lens If moisture condenses on the lens, no indicator appears, but the picture becomes dim. Turn off the power and do not use the camcorder for about one hour. How to Prevent Moisture Condensation When bringing the camcorder from a cold place to a warm place, put the camcorder in a plastic bag and allow it to adapt to room conditions over a period of time. (1) Be sure to tightly seal the plastic bag containing the camcorder. (2) Remove the bag when the air temperature inside it has reached the temperature surrounding it (after about 1 hour). 45