Sony DAV-DZ175 Operating Instructions - Page 20
When installing the speakers on a wall, Getting Started
View all Sony DAV-DZ175 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 20 highlights
Getting Started When installing the speakers on a wall Caution • Contact a screw shop or installer for information regarding the wall material or screws to be used. • Use screws that are suitable for the wall material and strength. As a plaster board wall is especially fragile, attach the screws securely to a beam. Install the speakers on a vertical and flat wall where reinforcement is applied. • Sony is not responsible for accidents or damage caused by improper installation, insufficient wall strength or improper screw installation, natural calamity, etc. 1 Connect the speaker cord with the color tube to 3, and the speaker cord without the color tube to #. Color tube Front left speaker (L): White Front right speaker (R): Red Center speaker: Green Surround left speaker (L): Blue Surround right speaker (R): Gray 2 Prepare screws (not supplied) that are suitable for the hole on the back of each speaker. See the illustrations below. 4 mm (3/16 inch) 30 mm (1 3/16 inches) 5 mm (7/32 inch) 10 mm (13/32 inch) Hole on the back of the speaker 3 Fasten the screws to the wall, then hang the speaker on the wall. Depth of fastened screw 8 to 10 mm (11/32 to 13/32 inch) For the center speaker 145 mm (5 3/4 inches) For the other speakers 20US