Sony DCR-SR40 Operating Guide - Page 10
Step 2: Charging the battery pack, To remove the battery pack - handycam station
UPC - 027242701496
View all Sony DCR-SR40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
Step 2: Charging the battery pack 2 1 5 Battery pack DC IN jack POWER switch 5 CHG 3 lamp DC plug AC Adaptor Power cord 4 To the wall outlet You can charge the battery after attaching the "InfoLITHIUM" battery pack (P series) to your camcorder. 1 Slide the battery pack in the direction of the arrow until it clicks. 2 Slide the POWER switch in the direction of the arrow to set it to OFF (CHG) (The default setting). 3 Connect the AC Adaptor to the DC IN jack on the Handycam Station. Be sure that the v mark on the DC plug is facing up. 5 Set the camcorder onto the Handycam Station securely. The CHG (charge) lamp lights up and charging starts. The CHG (charge) lamp turns off when the battery pack is fully charged. Remove the camcorder from the Handycam Station. To remove the battery pack Slide the POWER switch to OFF (CHG). Slide the BATT (battery) release lever and remove the battery pack. 4 Connect the power cord to the AC Adaptor and the wall outlet. 10 BATT (battery) release lever • When you remove the battery pack, make sure that none of the respective lamps of the POWER switch (p.12) is on.