Sony DCR-SR40 Operating Guide - Page 14

Recording Lens cover Opens in accordance with the setting of the POWER switch (DCR-SR60/SR80). START/STOP B START/STOP A 60min REC 00:01:00 START/ STOP P-MENU [STBY] b [REC] PHOTO Beep 60min 1.0M FINE 123 Shutter click P-MENU Flashing b Lights up 1 1 Slide the POWER switch in the direction of the arrow repeatedly until the respective lamp lights up. Press the green button only when the POWER switch is in the OFF (CHG) position. 2 Start recording. Movies Press START/STOP A (or B). To stop recording, press START/STOP again. Still Images Press PHOTO lightly to adjust the focus A, then press it fully B. A shutter sound is heard. When disappears, the image has been recorded. • If the ACCESS lamp is on after recording is finished, it means data is still being written onto the hard disk. Do not apply shock or vibration to your camcorder, and do not remove the battery pack or AC Adaptor. • You cannot record movies and still images at the same time. • The maximum continuous recordable time is approximately 13 hours. 14