Sony DCR-SR40 Operating Guide - Page 28
Pressing START/STOP or PHOTO does not record movies/still images., The recording stops. - movie format
UPC - 027242701496
View all Sony DCR-SR40 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Pressing START/STOP or PHOTO does not record movies/still images. • Slide the POWER switch to light up the (Movie) or the (Still) lamp (p.12). • Your camcorder is recording the image you have just shot on the hard disk of the camcorder. You cannot press PHOTO while [CAPTURE] or appears on the LCD screen. • The hard disk of the camcorder is full. Delete unnecessary images. Or perform [HDD FORMAT]. • The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place. • The temperature of your camcorder is extremely low. With POWER switch turned on, leave the camcorder for a while. If you still cannot operate the camcorder, turn it off, taking it to a warm place. Leave the camcorder there for a while, then turn on the camcorder. The recording stops. • The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place. • The temperature of your camcorder is extremely low. Turn off the camcorder and take it to a warm place. Leave the camcorder there for a while, then turn on the camcorder. • The maximum continuous recordable time is approximately approximately 13 hours. Setup items are grayed out. • You cannot select grayed out items in the current situation. The beep sounds for five seconds. • The temperature of your camcorder is extremely high. Turn off your camcorder and leave it for a while in a cool place. • Some problems have occurred in your camcorder. Turn off and on, then operate your camcorder again. 28