Sony DCR-TRV25 Operating Instructions - Page 104
Erasing all the data in cassette memory, Labeling a cassette
View all Sony DCR-TRV25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 104 highlights
Labeling a cassette To erase the label you have made In step 4 turn the SEL/PUSH EXEC dial to select [C], then press the dial. The last character is erased. To change the label you have made Insert the cassette to change the label, and operate in the same way to make a new label. If you set the write-protect tab of the cassette to lock You cannot label the tape. Slide the write-protect tab to release the write protection. If the tape has too many index signals You may not be able to label a cassette because the memory becomes full. In this case, delete data you do not need. If you have superimposed titles in the cassette When the label is displayed, up to four titles also appear. When the "-----" indicator has fewer than 10 spaces The cassette memory is full. "-----" indicates the number of characters you can select for the label. To erase the character Press [C]. The last character is erased. To enter a space Select [Z& ?!], then select the blank part. Erasing all the data in cassette memory You can erase all the data in cassette memory at once. (1) Set the POWER switch to CAMERA or VCR. (2) Press MENU, then select ERASE ALL in with the SEL/PUSH EXEC dial (p. 181). (3) Turn the SEL/PUSH EXEC dial to select OK, then press the dial. OK changes to EXECUTE. (4) Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial. ERASING flashes on the screen. When all the data is erased, COMPLETE is displayed. To cancel deleting Select RETURN with the SEL/PUSH EXEC in step 3 or 4. 104