Sony DCR-TRV25 Operating Instructions - Page 189
Types of trouble and how to correct trouble, Others
View all Sony DCR-TRV25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 189 highlights
Types of trouble and how to correct trouble Symptom You cannot write a print mark on the still image. The photo save function does not work. You cannot play back images in actual size. You cannot play back image data. Cause and/or Corrective Actions • The write-protect tab on the "Memory Stick" is set to LOCK. c Release the lock. (p. 105) • The image to write a print mark is not played back. c Press MEMORY PLAY to play back the image. (p. 137) • You are trying to write a print mark on a moving picture. c Print marks cannot be written on a moving picture. • The write-protect tab on the "Memory Stick" is set to LOCK. c Release the lock. (p. 105) • You may not be able to play back images in actual size when you try to play back images recorded by other equipment. This is not a malfunction. • Your camcorder cannot play back some images processed with a computer (The file name will blink). • If you record images with any other equipment, the images may not play back normally on your camcorder. Others Symptom The title is not recorded. The cassette label is not recorded. Digital program editing to a tape does not function. Cause and/or Corrective Actions • The cassette has no cassette memory. c Use a cassette with cassette memory. (p. 98) • The cassette memory is full. c Erase unwanted title. (p. 100) • The cassette is set to prevent accidental erasure. c Slide the write-protect tab so that red portion is not visible. (p. 25) • The tape has a blank portion between recorded portions. c Superimpose the title to a recorded portion. (p. 98) • The cassette has no cassette memory. c Use a cassette with cassette memory. (p. 103) • The cassette memory is full. c Erase unwanted titles. (p. 100) • The cassette is set to prevent accidental erasure. c Slide the write-protect tab so that red mark is not visible. (p. 25) • The input selector on the VCR is not set correctly. c Check the connection and set the input selector on the VCR again (p. 78) • The camcorder is connected to DV equipment of other than Sony using the i.LINK cable (DV connecting cable). c Set it to IR (p. 83). • Setting program on a blank portion of the tape is attempted. c Set the program again on a recorded portion (p. 86). • The camcorder and the VCR are not synchronized. c Adjust the synchronization (p. 84). • The IR SETUP code is incorrect. c Set the correct code (p. 79). (continued on the following page) 189 Troubleshooting