Sony DCR-TRV25 Operating Instructions - Page 161

Connecting your camcorder to your computer using the USB cable - For Windows users (11) Follow the on-screen messages so that the Add Hardware Wizard recognizes that the USB drivers have been installed. The Add Hardware Wizard starts three times because three different USB drivers are installed. Be sure to allow the installation to complete without interrupting it. For Windows 2000 Professional, Windows XP Home Edition/Professional users: (12) After the "File Needed" screen appears. Open "Browse..." t "My Computer" t "ImageMixer" t "Sonyhcb.sys", and click "OK". Viewing images recorded on a "Memory Stick" - Except DCR-TRV16 Before operation Set USBCONNECT in to NORMAL in the menu settings. (The default setting is NORMAL.) (1) Insert a "Memory Stick" into your camcorder. (2) Connect the AC power adaptor and set the POWER switch to MEMORY. (3) Connect the (USB) jack on your camcorder with the USB jack on your computer using the supplied USB cable. "USB MODE" appears on the LCD screen of your camcorder. Your computer recognizes the camcorder, and the Add Hardware Wizard starts. Viewing Images Using Your Computer (USB) jack Push into the end USB jack USB cable (supplied) (4) Follow the on-screen messages so that the Add Hardware Wizard recognizes that the USB drivers have been installed. The Add Hardware Wizard starts two times because two different USB drivers are installed. Be sure to allow each installation to complete without interrupting them. You cannot install the USB driver if a "Memory Stick" is not in your camcorder. Be sure to insert a "Memory Stick" into your camcorder before installing the USB driver. 161