Sony DCR-TRV25 Operating Instructions - Page 82
Confirming VCR operation, When the VCR does not operate correctly
View all Sony DCR-TRV25 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 82 highlights
Dubbing only desired scenes - Digital program editing (on tapes) (4) Confirming VCR operation 1 Insert a recordable tape into the VCR, then set to recording pause. 2 Turn the SEL/PUSH EXEC dial to select IR TEST, then press the dial. 3 Turn the SEL/PUSH EXEC dial to select EXECUTE, then press the dial. If the VCR starts recording, the setting is correct. When recording is finished, the indicator changes to COMPLETE. 2 VIDEO EDIT 0:08:55:06 EDITSET CONTROL ADJ TEST "CUT-IN" "CUT-OUT" ENGAGE IR SETUP REC PAUSE PAUSEMODE IR TEST RETURN RETURN EXECUTE [MENU] : END 3 VIDEO EDIT 0:08:55:06 EDITSET CONTROL ADJ TEST "CUT-IN" "CUT-OUT" IR SETUP PAUSEMODE IR TEST COMPLETE RETURN [MENU] : END When the VCR does not operate correctly •After checking the code in "About IR SETUP codes," set the IR SETUP or the PAUSEMODE again. •Place your camcorder at least 30 cm (12 in.) away from the VCR. •Refer to the operating instructions of your VCR. 82