Sony DIR-TC1 Instruction Manual - Page 10
Unplug the calibration mic and press, to select [YES]., Press
View all Sony DIR-TC1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
• Avoid being in the measurement area and making noise during the measurement (which takes about 3 minutes), as it may interfere with measurement. 9 Unplug the calibration mic and press C/ c to select [YES]. Quick Setup is finished. All connections and setup operations are complete. Measurement complete. FRONT L : YES FRONT R : YES CENTER : NONE SUBWOOFER : YES SURROUND L : NONE SURROUND R : NONE If OK, unplug calibration mic and select "YES". YES NO Note • Reflections from walls or the floor may affect measurements. • If measurement fails, follow the message then retry [AUTO CALIBRATION]. • When you select [SECOND ROOM] for [SPEAKER FORMATION], the measurement of [SURROUND L] and [SURROUND R] are not displayed. 10 Press . 10GB
10
GB
• Avoid being in the measurement area and
making noise during the measurement (which
takes about 3 minutes), as it may interfere with
measurement.
9
Unplug the calibration mic and press
C
/
c
to select [YES].
Quick Setup is finished. All connections
and setup operations are complete.
Note
• Reflections from walls or the floor may affect
measurements.
• If measurement fails, follow the message then
retry [AUTO CALIBRATION].
• When you select [SECOND ROOM] for
[SPEAKER FORMATION], the measurement
of [SURROUND L] and [SURROUND R] are
not displayed.
10
Press
.
FRONT L :
FRONT R :
CENTER
:
SUBWOOFER :
SURROUND L :
SURROUND R :
If OK, unplug calibration mic and select
“YES”.
YES
YES
YES
NONE
YES
NONE
NONE
Measurement complete.
NO