Sony DIR-TC1 Instruction Manual - Page 12
Installing the IR receiver on a, receiver on the screw.
View all Sony DIR-TC1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 12 highlights
Installing the IR receiver on a wall 1 Install a commercially available screw in the wall so as to protrude 4 mm (3/16 inch). 5 to 7 mm (7/32 to 9/32 inch) 4 mm (3/16 inch) 2 Detach the IR receiver stand and hang it by the hole on the rear of the IR receiver on the screw. Make sure that the IR receiver does not move after installation. IR receiver IR receiver stand Tip • When reattaching the IR receiver stand to the IR receiver, attach the stand so that both delta marks on the IR receiver and stand are aligned. 12GB
12
GB
Installing the IR receiver on a
wall
1
Install a commercially available screw
in the wall so as to protrude 4 mm (
3
/
16
inch).
2
Detach the IR receiver stand and hang
it by the hole on the rear of the IR
receiver on the screw.
Make sure that the IR receiver does not
move after installation.
Tip
• When reattaching the IR receiver stand to the IR
receiver, attach the stand so that both delta marks on
the IR receiver and stand are aligned.
4 mm
(
3
/
16
inch)
5 to 7 mm
(
7
/
32
to
9
/
32
inch)
IR receiver
IR receiver stand