Sony DIR-TC1 Instruction Manual - Page 8
Connecting the AC Power Cords (Mains Leads), Adjusting the Wireless System, Press - infrared transmitter for wireless speakers
View all Sony DIR-TC1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
Connecting the AC Power Cords (Mains Leads) Before connecting the AC power cords (mains leads) of your Sony DVD Home Theatre System (DAV) and the surround amplifier to a wall outlet (mains), connect the front and center speakers to your DAV, and surround speakers to the surround amplifier. Adjusting the Wireless System After connecting the speakers, surround amplifier, IR transmitter, IR receiver, and the AC power cords (mains leads), adjust the wireless system for good transmission. "/1 • If the POWER/ON LINE indicator flashes in red, the IR receiver is receiving an infrared signal from another Sony's wireless product. Move the IR transmitter and/or the IR receiver so that the POWER/ON LINE indicator turns green. POWER POWER/ON LINE Indicator POWER POWER ON-LINE 1 Press "/1 on DAV and POWER on the surround amplifier. The DAV and surround amplifier turn on and the POWER/ON LINE indicator turns red. 2 Orient the IR transmitter and IR receiver to face each other. Adjust the position until the POWER/ON LINE indicator turns green. Tip • The IR transmitter is movable for easy reorientation. Note • Make sure that there is no obstruction such as a person or object between the IR transmitter and the IR receiver. Otherwise, the sound from the surround speakers may be interrupted. • If the POWER/ON LINE indicator turns red, the transmission is incomplete. Adjust the position of the IR transmitter and IR receiver until the POWER/ON LINE indicator turns green. 8GB