Sony DIR-TC1 Instruction Manual - Page 6
About the surround amplifier, Attaching the cover
View all Sony DIR-TC1 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
About the surround amplifier After connecting, you can attach the cover to the surround amplifier for organizing and storing excess speaker cords. Attaching the cover 1 Attach the speaker cord cover by sliding it down along the grooves at the edges of the surround amplifier. Speaker cord cover 3 Secure the speaker cord holder with the supplied screw. Screw Surround amplifier Grooves Push the speaker cord cover down until you hear a click. Turn the surround amplifier upside down, then store the cords in the speaker cord cover. 2 Insert the tabs of the speaker cord holder in the slots of the speaker cord cover, and press it into place. Speaker cord holder Note • Do not use the speaker cord cover and holder without the supplied screw. • Before detaching the speaker cord cover, first remove the screw, then the speaker cord holder. Forcing the speaker cord cover off with the screw in place may cause damage. • Gently pull apart the side of the speaker cord cover when detaching. Surround amplifier Tabs 6GB